How does it work?

1) How do I know the charger is working?

- The red power light will illuminate when it is running.
- Your phone will indicate charging

2) How to power from a battery pack:

- Plug directly into a power outlet on the battery pack.
- You may need to turn the battery pack outlet on.

3) How to power from the power grid:

- Plug directly into a power outlet.

4) How to power from solar:

4.1) You will need the solar adapter.

4.2) Use any standard solar panels — rigid or flexible — and you’re good to go.

4.3) Do you have 12 volt or 24 volt panels?
- Check the label on the back of your panel and find the voltage rating (usually marked ‘Vmp’ or ‘Vpmax’).

4.4) - If it’s above 24V, it’s a 24V panel. If it’s below 24V, it’s a 12V panel.

Number is less than 24.
This is a 12-volt panel.

Number is greater than 24.
This is a 24-volt panel.

Number is greater than 24.
This is a 24-volt panel.

4.5) If you have 24-Volt Panels (you need 3 of them)

Connect them together in "Series" (3 x 24-volt panels)

4.6) If you have 12-Volt Panels (you need 6 of them)

Connect them together in "Series" (6 x 12-volt panels)

4.7) Attach the solar adapter cable onto the end solar panels connections.
- Make sure the charger is NOT plugged in.
- Black cable attaches to solar panel "-" cable.
- Red cable attaches to solar panel "+" cable

4.8) Once your panels are connected and the adapter is in place, plug in the charger last. The red power light should turn on — and you’re ready to charge.

• Get the GridMover Charger

• Back

FAQ - Frequently Asked Questions

1) What is the GridMover Charger?

- A high-performance, 342W off-grid charger with 8 USB ports and dual wireless charging pads.
- Works with solar panels, battery packs, or the grid — no inverter required.

2) Can I use this if I don’t have solar yet?

- Yes! You can power it using any standard wall outlet or battery pack.

3) Does it work without solar?

- Yes. It works on the power grid, standard battery packs / banks and it works on solar.

4) Can I use it during blackouts?

- Yes. If there is sunlight - power the charger with solar.
- You may also use a generator or a battery pack / bank.

5) What power grids does it work on?

- It works on any power grid that has a voltage from 100 to 240 volts.
- For voltages above 120, you will need an adapter. This should be included with your charger (based on the country it ships to).

6) Can I charge battery packs / banks with it?

- Yes. If the battery can be charged by USB or USB-C.
- Use the PD100 port for charging up to 100 watts.

- Make sure your USB-C cable is rated for 100W or higher to get the full power from the PD100 port.

7) What are the maximum watts each port will run?

-The ports are marked with their maximum wattage.
-The wireless smart phone / device charger runs up to 15 watts max, if your phone / device supports that.

PD100 = 100 watts max.
C2 = 20 watts max.
A1 = 18 watts max.
A2 = 18 watts max.

8) Where do I get the solar adapter?

- It is optional and may come with your charger.
- You may also buy one separately from our Indiegogo campaign.

9) What solar panels does it work with?

-You’ll need 3 standard 24V panels, or 6 standard 12V panels — connected in series.

• (How to operate with solar)

10) How many watts of solar panels do I need?

-Running the charger at full power:
-Single USB or USB + Wireless = 300 Total Solar Panel Watts.
-Double USB + Wireless = 600 Total Solar Panel Watts.

11) What if there aren't enough solar panel watts

-The charger will run at lower capacity if there is not enough wattage.

12) The plug won't fit into my power outlet.

-If your power grid or battery outlets are different than the US outlet type, you need an adapter.
-Your charger should come with it.

13) When does it ship?

-🚚 Shipping starts July.
-🎁 Early bird perks now available on Indiegogo!

• Get the GridMover Charger

Still Have Questions? Ask us!

• Back

Address Received!

You are now on our list, thank you!

• Continue